Practical, professional-grade courses on drone electronics, flight systems, and aviation operations. Taught by people who actually work on the hardware.
1 course live now · 5 more in development · all self-paced and free
From reading schematics to diagnosing field faults — circuit theory, ESC internals, PCB rework, EMI shielding, and BMS design for pilots and technicians.
Every component of a multirotor from the frame up — assembly, calibration, and maintenance to airworthy condition without a workshop.
Radio link fundamentals, MAVLink protocol, Mission Planner / QGroundControl, RTK/PPK GPS, and live telemetry logging for real missions.
Through-hole and SMD soldering, hot-air rework, ESC motor lead repair, and diagnosing cold joints, bridges, and lifted pads.
Drone Rules 2021, Digital Sky platform, Green/Yellow/Red zones, Remote Pilot Certificate process, and commercial operation compliance.
Precision spray theory, crop science, nozzle selection, chemical handling, NDVI interpretation, and field documentation for Punjab operations.
Education built for the people who keep aircraft flying.
Every course and every module is completely free to access. Create a free account to track your progress and earn a certificate.
Every lesson was written and reviewed by working drone technicians and avionics engineers — not content farms.
Reinforce your learning with a 1-day in-person workshop. Solder live hardware, wire a test bench, diagnose a real fault.
Complete a course and receive a shareable, verification-linked certificate you can add to your CV or LinkedIn.
Book a 1-day hands-on workshop. Solder an ESC, wire a test bench, and diagnose a real fault with the technicians who built these courses.